Product ID:75004-95/5 ACID CORE SOLDER
MSDS Date:05/11/1990
FSC:3439
NIIN:00N053659
MSDS Number: BVXGF

KAR PRODUCTS

461 NORTH THIRD AVENUE
DES PLAINES, IL 60016
US

Emergency Phone: 708-296-6111;800-424-9300(CHEMTREC)

Info Phone: 708-296-6111

Cage: GO039

KAR PRODUCTS

DES PLAINES, IL 60016 US

Telephone: (312) 296-6111

Cage: GO039

TIN

CAS: 7440-31-5

RTECS: XP7320000

Fraction By Weight: 95%

OSHA PEL 2 MG/M3

ACGIH TLV: 2 MG/M3

SILVER (SARA III)

CAS: 7440-22-4

RTECS: VW3500000

Fraction By Weight: 50-60%

OSHA PEL 0.01 MG/M3

ACGIH TLV: 0.1 MG/M3

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

LEAD (SARA III)

CAS: 7439-92-1

RTECS: OF7525000

OSHA PEL SEE 1910.1025

ACGIH TLV: 0.15 MG/M3,DUST;9394

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:MOLTEN SOLDER ALLOYS DO NOT PRODUCE
SIGNIFICANT LEAD FUME BELOW 900F. EXPOS TO HIGH LEVELS OF
AIRBORNE/INGESTED LEAD MAY PRODUCE SYMPS OF ANEMIA, INSOMNIA,
WEAKNESS, CONSTIPATION, NAUSEA & ABDOMINAL P AIN. PLNGD EXPOS MAY
RSLT IN KIDNEY & NERVOUS SYSTEM INVOLVEMENT. WOMEN OF CHILD BEARING
AGE SHOULD (EFT OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HLTH HAZ: AVOID EXPOS TO LEAD DUE TO POST-NATAL
EFTS. WARNING! THIS PROD CONTAINS LEAD KNOWN TO STATE OF CA TO
CAUSE BIRTH DEFECTS/OTHER REPRO HARM. NOTE: LEAD APPEARS ON THE
NAVY LSTING OF OCCUP CHEM ICAL REPRO HAZARDS. SEEK CONSULT FROM
APPROP HEALTH PROFESSIONALS CONCERNING LATEST HAZARD LIST INFO &
SAFE (SUPP DATA)
Medical Cond Aggravated by Exposure:NONE KNOWN.

First Aid:EYE(BURNS): FLUSH IMMED W/COOL WATER & OBTAIN MD AID.
INHAL(FUME IRRIT): REMOVE INDIVIDUAL FROM EXPOSURE. IF FLUX FUME IS
INHAL WHEN WIRE IS HEATED TO SOLDERING TEMPS, REMOVE INDIVIDUAL TO
FRESH AIR. IF BRTHG DFCLT, ADMIN O*2 & CONSULT A MD. SKIN(BURNS):
COOL W/WATER & OBTAIN MED AID. INGEST: CALL MD/POISON CONTROL
CENTER IMMED. NEVER GIVE ANYTHING BY MOUTH TO AN UNCON PERSON.

Extinguishing Media:USE MEDIA SUITABLE FOR SURROUNDING FIRE.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT.
Unusual Fire/Explosion Hazard:WHEN HEATED TO HIGH TEMPERATURES, LEAD
EMITS HIGHLY TOXIC FUMES.

Spill Release Procedures:SOLID AT ROOM TEMPERATURE. IF IN MOLTEN STATE,
ALLOW TO COOL & SOLIDIFY. THEN SCOOP UP. FLUX IS WATER SOLUBLE.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:NO SPECIAL REQUIREMENTS FOR STOR. READ
ALL CONTAINER LABELING. ALWAYS WASH HANDS AFTER HANDLING CORE
SOLDER & BEFORE EATING, DRINKING OR SMOKING.
Other Precautions:FOOD & DRINK SHOULD NOT BE CONSUMED/TOBACCO PRODS
USED, NOR COSMETICS APPLIED IN AREAS WHERE CORE SOLDERS MAY BE
USED. CNTNRS: SINCE EMPTY CNTNRS MAY RETAIN PROD RESIDUES(VAP,
LIQ/SOLID) ALL LABELED H AZ PRECS MUST BE OBSERVED.(SUPP DATA)

Respiratory Protection:IF ANY THRESHOLD LIMIT VALUE IS EXCEEDED, USE
NIOSH/MSHA APPROVED RESPIRATOR.
Ventilation:PROVIDE SUFFICIENT MECH (GENERAL &/LOCAL EXHAUST). VENT TO
MAINTAIN EXPOS LEVELS BELOW TLVS.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:SAFETY GOGGLES WHEN SOLDERING.
Other Protective Equipment:NOT USUALLY NECESSARY.
Work Hygienic Practices:OBSERVE PRECUATIONS WHEN WORKING & PRACTICE
GOOD HABITS OF CLEANLINESS.
Supplemental Safety and Health
EFTS OF OVEREXP: HANDLING & EXPOSURE INFORMATION. MOLTEN CORE FLUX WILL
CAUSE SKIN/EYE/RESP IRRITATION. INGEST NOT LIKELY TO OCCUR. OTHER
PRECS: FOR INDUSTRIAL USE ONLY. KEEP OUT OF REACH OF CHI LDREN. DO
NOT TAKE INTERNALLY.

Solubility in Water:INSOLUBLE
Appearance and Odor:SILVER-GRAY METAL WIRE, ODORLESS, VARIOUS SHAPES &
SIZES.

Stability Indicator/Materials to Avoid:YES
OXIDIZING MATERIALS, STRONG ACIDS.
Stability Condition to Avoid:NONE.
Hazardous Decomposition Products:THE SMOKE FROM A SOLDERING OPERATION
USING THIS PRODUCT MAY CONTAIN A TRACE OF AMMONIA.

Waste Disposal Methods:THE ALLOY IS RECLAIMABLE. MUST BE IN ACCORDANCE
WITH LOCAL, STATE & FEDERAL LAWS & REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.